– 16 –
Quick Guide to Basic System Functions
FUNCTION PROCEDURE COMMENTS
Check Zones Press READY key. View faulted zones when system not ready.
Arm System Enter code. Press arming key desired:
(AWAY, STAY, NIGHT-STAY (Internal),
Arms system in mode selected.
Press #. Press arming key desired:
(AWAY, STAY, MAXIMUM, INSTANT)
Arms system in mode selected, quickly and without use of a
Bypass Zone(s) Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Bypassed zones are unprotected and will not cause an alarm
Enter code. Press BYPASS key + [#]. Bypasses all faulted zones automatically.
Enter code. Press OFF key.
Press OFF key.
Press any key.
Also disarms system. Memory of alarm remains until
Memory of Alarm remains until cleared.
Disarm System Enter code. Press OFF key. Also silences sounders. Memory of alarm remains until
Clear Alarm Memory After disarming, enter code again.
Press OFF key again.
Keypad beeps rapidly on entry if alarm has occurred while
absent. Alarm display will remain upon disarming until
Duress (if active
and connected to
Arm or disarm "normally", but
use your 4-digit Duress code to do so.
Performs desired action and sends silent alarm to Central
Press key [A], [B], or [C] for at least 2
seconds or briefly press assigned key pair.
See the Panic Keys section for emergency functions
programmed for your system. Note: Keys “A”, “B”, and “C”
may have been programmed for other functions.
Chime Mode To turn ON or OFF: Enter code. Press
The keypad will sound if selected doors or windows are
violated while system is disarmed and chime mode is ON.
Test Mode To turn ON: Enter code. Press TEST + .
To turn OFF: Enter code. Press OFF key.
Tests alarm sounder and allows sensors to be tested.
Consult Phone Access User's Guide that
accompanies the Phone Module.
Permits system access remotely, via multifrequency phone.