Loading...
– 5 –
Basic Arming Modes
Stay Security code + [3] (STAY)
Causes: three beeps, armed STAY displayed, ARMED indicator lights
Arms perimeter sensors, but interior sensors are left disarmed.
Use when you want to arm the system with persons staying inside (or if you have pets that are moving
throughout the premises).
Alarm sounds if any protected window or non-entry/exit door is opened.
Persons entering later can enter through an entry/exit door, but they must disarm the system within the
entry delay period to avoid sounding an alarm.
Night-Stay Security code + [3] + [3]
(Internal) Causes: three beeps, NIGHT-STAY displayed, ARMED indicator lights
Same as Stay mode, plus pre-selected interior sensors, while other interior sensors are left disarmed.
Use Night-Stay (internal) mode to provide increased security while staying inside.
Persons entering later can use an entry/exit door but they must disarm the system and must not violate
any of the programmed interior zones to avoid sounding an alarm.
IMPORTANT: When Night-Stay mode is on, the selected interior zones are armed and cause an alarm if
anyone enters those areas (e.g., waking in the middle of the night). To avoid sounding an alarm, you
must disarm the system before any activity takes place in those zones.
Instant Security code + [7] (INSTANT)
Causes: three beeps, armed INSTANT displayed, ARMED indicator lights
Arms same as Stay mode but with entry delay off.
Use when staying inside and do not expect anyone to use an entry/exit door.
An alarm sounds immediately if any protected perimeter window or any door is opened, including
entry/exit doors.
IMPORTANT: Arming in this mode greatly increases the chance of false alarms. Use extreme care in
selecting this mode of arming.
Away Security code + [2] (AWAY)
Causes: beeping during exit delay, armed AWAY displayed, ARMED indicator lights
Arms entire system (interior and perimeter).
Use when nobody will be staying inside (including pets).
An alarm sounds if a protected window or any door is opened, or if any movement is detected inside your
premises.
When reentering through an entry/exit door, you must disarm the system within the entry delay period to
avoid sounding an alarm.
Maximum Security code + [4] (MAXIMUM)
Causes: same as Away mode; arms same as Away mode, but entry delay is off.
Use when arming/disarming is being done from the outside (e.g. RF keyfob)
Step Arming Press designated key A, B, C, or D, if programmed, once, twice or three times depending on the
arming mode desired. Each key press increases the level of security.
First press: arm STAY; second press: arm Night-STAY; third press: arm AWAY
Quick Arm Press [#] + arming command key, if programmed.
This feature lets you press [#] in place of the security code when arming the system.
The security code must always be used to disarm the system.
Function Key Press and hold the assigned function key for 2 seconds, if programmed.
Arming You do not need to enter your security code before pressing the arming key.
Arms in designated arming mode. See your installer for the designated functions.
Disarming and Silencing Alarms
Disarming Security code + [1] OFF
The “READY” indicator lights if all zones are secure
The keypad emits a single tone to confirm that the system is disarmed.
To Silence a Security code + [1] OFF
Burglary Alarm The “READY” indicator lights if all zones are secure
The keypad emits a single tone to confirm that the system is disarmed.
To Silence a Simply press the OFF key
Fire Alarm The “READY” indicator lights if all zones are secure
The keypad emits a single tone to confirm that the system is disarmed.
Memory of When an alarm condition occurs, the keypad displays the number(s) of the zone(s)
Alarm that caused the problem, and displays the type of alarm.
To Clear Alarm Display and/or “Alarm Canceled” display: Security code + [1] OFF again
Note the zone in alarm on the keypad display, and make that zone intact (close door, window, etc.).
The message remains displayed even after disarming the system, but can be cleared with another
“disarm” sequence.
IMPORTANT: If you return and the main burglary sounder is on, DO NOT ENTER, but CONTACT THE POLICE from
a nearby safe location.
If you return after an alarm has occurred and the main sounder has shut itself off, the keypad will beep rapidly upon your
entering, indicating that an alarm has occurred during your absence.
LEAVE AT ONCE, and CONTACT THE POLICE from a nearby safe location
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com