Loading...
7
Non-Alarm Functions
Chime Mode
Chime mode alerts you to movement within the premises while the system is disarmed.
Chime Mode on Security code + [9] (Chime message appears)
keypads sound three beeps whenever a protected door, window or other specified zone is opened.
Pressing the [] READY key will display the open protection points.
Chime Mode off Security code + [9] again (Chime message disappears)
Voice Chime: You can set the Voice Touchpads (if installed) to announce faulted (opened) entry/exit or perimeter
zones whenever normal Chime mode is on.
Voice Chime [#] + [0] [2] [4] (normal Chime mode must be on first)
on/off When Voice Chime is on, faulted zones cause a voice status announcement, chime and display.
When off, the sounder still provides chime if normal Chime mode is on.
Using the Voice Message Center
The Voice Keypads feature a voice message center that lets you record and playback one message.
Basic Information
The message can be up to 2.5-minutes long
The message remains in the keypad’s memory until a new message is
recorded.
The volume control of the message is adjustable.
Refer to the procedures below when using the Message Center functions.
1
OFF
4
MAX
7
INSTANT
READY
2
AWAY
5
TEST
8
CODE
0
3
STAY
6
BYPASS
9
CHIME
#
ARMED
READY
6160V-00-005-V0
MESSAGE
MIC
RECORD VOLUME PLAY
STATUS VOICE FUNCTION
VOLUME
KEY
VOICE
KEY
STATUS
KEY
FUNCTION
KEY
DOWN
VOLUME
PLAY KEY
AND
UP VOLUME
RECORD
KEY
SPEAKER
LCD
DISPLAY
MICROPHONE
LEDs
Message Center Functions
Record a [#] FUNCTION + [0] VOICE + [1] RECORD (red MESSAGE LED lights)
Message Message remains in memory until a new message is recorded.
End Recording [1] RECORD (red MESSAGE LED flashes, indicating message waiting)
Play a Message [#] FUNCTION + [0] VOICE + [3] PLAY
The recorded message plays and the red MESSAGE LED turns off.
Adjust the [#] FUNCTION + [0] VOICE + [2] VOLUME keys,
Volume then press volume key [3] (up) or [6] (down)
Adjusting message volume also adjusts status volume.
Volume cannot be adjusted while playing.
Using Macro Keys
See Defining Macro Keys section in the Advanced System Features section for details on defining macro keys.
Macro Keys The “A”, “B”, “C” or “D” key may have been pre-programmed as a “macro” key.
Macros can be activated only by users authorized to perform the macro’s function.
Using a Press and hold the defined Macro key for at least 2 seconds.
Macro Key The “Enter User Code” prompt appears and remains displayed for up to 10 seconds.
Enter your 4-digit user code.
The programmed macro sequence begins automatically after the user code is entered.
System Devices
Your system may be set up so that it can control certain lights or other electrically operated devices.
About System
Devices
Some devices may be automatically turned on or off by the system.
You may be able to override automatically controlled devices.
Some devices can be manually turned on or off using the commands described below.
See your installer for a list of devices that may be set up for your system.
To Activate
Devices
Security Code+ [#] + [7] + nn (nn = 2-digit device number)
Devices associated with that device number activate.
To Deactivate
Devices
Security Code+ [#] + [8] + nn (nn = 2-digit device number)
Devices associated with that device number deactivate.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com