– 13 –
CHECKING FOR OPEN ZONES
Using the *
Before arming your system, all protected doors, windows and other protection zones must be
closed or bypassed (see BYPASSING section). Otherwise the keypad will display a "Not
Ready" message. Using the READY key will display all zones that are faulted, making it
easier for you to secure any open zones.
Display if there are faulted zones:
PRESS *Note: A green READY indicator on keypads will light when
TO SHOW FAULTS the system is ready. If not lit, the system is not ready to be
1. Do not enter security code, but simply press * .
FAULT 05 FRONT
Typical fault display
2. Secure or bypass the zones displayed before arming the system. The "Ready" message
will be displayed† when all protection zones have been either closed or bypassed.
**** DISARMED ****
READY TO ARM
†NOTE: All or part of this message may be replaced by a
customized message programmed by the installer. Bear this in
mind whenever the instructions indicate that the "DISARMED"
or "READY" message will be displayed.