Loading...
– 15 –
BYPASSING PROTECTION ZONES
Using the 6
BYPASS Key
This key is used when you want to arm your system with one or more zones intentionally
unprotected. Bypassed zones are unprotected and will not cause an alarm when violated
while your system is armed. All bypasses are removed when an OFF sequence (security code
plus OFF) is performed. Bypasses are also removed if the arming procedure that follows the
bypass command is not successful.
Note: The system will not allow fire or emergency zones to be bypassed.
To bypass zones, the system must be disarmed first.
BYPASS
1. Enter your security code and press 6 .
2. Enter zone number(s) for the zones to be bypassed (e.g., 01, 02, 03, etc.).
Important! All single-digit numbers must be preceded by a zero (for example, enter 01
for zone 1).
3. When finished, the keypad will display the word BYPASS along with each bypassed zone
number. Wait for these zones to be displayed before arming. Arming the system before
bypassed zones are displayed eliminates all bypasses.
BYPASS 07 FRONT
UPSTAIRS BEDROOM
Typical bypass message
When finished, the keypad will display the word BYPASS
along with each bypassed zone number. Wait for these
zones to be displayed before arming. Arming the system
before bypassed zones are displayed eliminates all
bypasses.
4. Arm the system as usual when the keypad displays "ready" to arm message.
DISARMED BYPASS
READY TO ARM
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com