Loading...
– 29 –
SECURITY CODES & AUTHORITY LEVELS
To Add a User
NOTE: Adding/deleting
security codes can only
be done from an alpha
keypad.
IMPORTANT: Temporary users should not be shown how to use any system function they
do not need to know (e.g. bypassing protection zones).
CODE
1. Enter Master or Manager code and press the 8 key.
2. Enter the new user's 2-digit User Number (01-69).
3. Enter 4-digit security code for that user. The following prompts will appear.
ADD NEW USER ?
0=NO, 1 =YES
Enter 1 to add a new user code. Entering 0 will change the
existing user's code to the code entered in step 3. See
Changing A User's Code section.
USER NUMBER = 3
ENTER AUTH. LEVEL
Enter the authority level, 1–6, for this user within this partition.
1 = master 3 = operator A 5 = operator C
2 = manager 4 = operator B 6 = duress code
RF BUTTON ?
0 = NO , 1 =YES
This prompt will appear if a 5800 series button transmitter has
been supplied and has not yet been assigned to a user.
Press 1 if a button transmitter will be assigned to this user.
Otherwise press 0.
ENTER BUTTON ZN #
(01–64)
If assigning a button transmitter, this prompt will appear.
Enter the button's zone number (see your installer for zone
number).
MULTI-ACCESS ?
0 = NO, 1 =YES
If you as a user have access to other partitions, the keypad
will prompt for ability of this new user to access (GOTO) those
partitions. Press 0 (NO) or 1 (YES). If no, the system activates
this user code and exits “Add a User” mode. If yes, the
keypad prompts for the Global Arm option for this user.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com