– 30 –
SECURITY CODES & AUTHORITY LEVELS
To Add a User
GLOBAL ARM ?
0 = NO, 1 = YES
Press 1 (Yes) if this user will be allowed to arm both partitions.
Press 0 (No) if this user will arm only his assigned partition.
PART.2 - SHOP?
0 = NO, 1 =YES
The keypad now prompts for the user’s access to the next
partition (see GOTO command). Again, press 0 or 1. If yes, the
system will automatically assign a user number for use in that
partition and will prompt for the authority level and global arm
option for this user within the partition (see previous steps).
PART.1 *W HSE
USER 03 AUTH =3G
When both partitions have been displayed, the keypad scrolls
through the partition(s) to which access has been assigned,
and will display the user number, authority level and global arm
option for each. Note that the “G” following the authority level
indicates that the global arm feature has been selected for this
user in the displayed partition. The "*" indicates the partition
from which the user can be changed or deleted.
To Change a
1. Enter Master/Manager code and press the 8 key + user number to be changed.
2. Enter the new code for that user.
ADD NEW USER?
0 = NO, 1 = YES
The system will recognize that the user number is already in
use and will prompt whether or not this is a new user. Enter 0
to change the user's code to the code entered in step 2.
USER 02 CHANGED
The system confirms that the change is allowed based on
authorization level, and if so, puts the new code into effect.
Note that if changing one’s own code, the system will
prompt for the new code to be re-entered. This prevents
accidentally changing a high level code.