– 4 –
Burglary Protection The burglary protection portion of your system must be turned on or "armed" before it will
sense burglary alarm conditions. When the system is armed, faulting one or more protection
zones causes an alarm to sound and allows the central station to listen-in to activity at the
premises (if your system is so equipped).
Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and
MAXIMUM, and even allows you to BYPASS selected zones of protection while leaving the
rest of the system armed. The system also provides a CHIME mode, for alerting users to the
opening and closing of doors and windows while the system is disarmed. Refer to the other
sections of this manual for procedures for using these features.
The following table lists the four different arming modes and the results of each.
Arming Features For Each Arming Mode
Mode Exit Delay Entry Delay Perimeter Armed Interior Armed
AWAY Yes Yes Yes Yes
STAY Yes Yes Yes No
MAXIMUM Yes No Yes Yes
Fire Protection The fire protection portion of your security system (if used) is always on and sounds an alarm if
a fire condition is detected*, and allows the central station to listen-in to activity at the premises
(if your system is equipped with the 2-way voice feature). Refer to the
section for important information concerning fire protection, smoke detectors and planning
emergency exit routes from your house.
*This control complies with National Fire Protection Association (NFPA) requirements for temporal
pulse sounding of fire notification appliances. Temporal pulse fire alarm sounding occurs only at
external sounders and at 2-way voice keypads (if used), and consists of:
3 pulses – pause – 3 pulses – pause – 3 pulses. . .
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com