Part of N7003V1
VISTA-40 EVENT LOGGING PROCEDURES
The system has the ability to record various events in a
history log wherein each event is recorded in one of five
categories (listed below), with the time and date of its
occurrence. The Event Log holds up to 100 events, with
the oldest event being replaced by the logging of any
new event after the log is full. Using an alpha keypad, the
Event Log can be viewed one category at a time, or can
display all events, regardless of category (ALL EVENT
LOG). The system also allows selection of displaying the
COMPLETE log, or only those events occurring since
the last installer service (RECENT). In addition, events in
the other partition can be viewed by users authorized to
access that partition. Note that events are displayed in
chronological order, from most recent to oldest.
To Display The Event Log
1. Enter CODE + [#] +  + 
2. Select the display mode.
RECENT: Displays only those events occurring
since last installer service.
COMPLETE: Displays complete event log (up to 100
Press the desired key, 0 or 1.
ENTER 0 = RECENT
1 = COM PL ETE
3. Select the partition, 0-2.
Enter the partition number for the partition whose
events are to be displayed.
Entering 0 (NO) will display all partitions' events.
SCAN LOG BY PAR T
0 = NO 1–2 = PART #