Loading...
./#
%$
*43
Primary/Secondary Account Numbers
*44
Enter 4 or 10 digits, depending on selection in
*45
*48 Report Format field. Enter 0–9; # + 11 = B,
*46
# + 12 = C, # + 13 = D, # + 14 = E, # + 15 = F.
H,)7/&$1)-?$
H,,7/&$1)--$
H,-7$#$1)-A$
H,.7$#$1)-@$
*47
Phone System Select
If Central Station Receiver is not on WATS line:
0 = Pulse Dial; 1 = Tone Dial
If Central Station Receiver is on WATS line:
2 = Pulse Dial; 3 = Tone Dial
&'$
*48
Report Format (Primary/Secondary)
0 = 3+1, 4+1 ADEMCO L/S STANDARD
1 = 3+1, 4+1 RADIONICS STANDARD
2 = 4+2 ADEMCO L/S STANDARD
3 = 4+2 RADIONICS STANDARD
5 = ADEMCO 10-digit Contact ID®
6 = 4+2 ADEMCO EXPRESS
7 = ADEMCO 4-digit Contact ID®
8 = 3+1, 4+1 ADEMCO L/S EXP.
9 = 3+1, 4+1 RADIONICS EXP.
&&$
*49
Split/Dual Reporting
0 = standard/backup reporting only (see Backup Reporting
below)
To Primary No. To Secondary No.
1 = alarms, restore, cancel others
2 = all except open/close, test open/close, test
3 = alarms, restore, cancel all
4 = all except open/close, test all
5 = all all
'!7&
&E$
+&E
&$+
/@&&
N0<77$+684%O0C*
&$
*50
Burglary Dialer Delay
0 = no dial delay; 1 = 15 secs; 2 = 30 secs; 3 = 45 secs
86)-
+>)&/A
V21iPSIA:
Delay Time: 1 = 15 secs; 2 = 30 secs; 3 = 45 secs
Delay Disable:
0 = use delay set in entry 1
1 = dial delay disabled for zones listed in zone list 6
(use zone list 6 to enter those zones that require
dial delay to be disabled; these zones ignore the
setting in entry 1)
UL: Dial delay plus entry delay must not exceed one
minute; use zone list 6 to disable dial delay from
appropriate zones, if necessary.
'&N584>64:647O

'$1&
&H&#-&#-*
H&@"E
C&&&
$
*53
SESCOA/Radionics Select
0 = Radionics (0-9, B-F); 1 = SESCOA (0-9 only)
 % 0<4$
-$
*54
Dynamic Signaling Delay
0 = disabled (both signals sent);
1–15 = entry times a 15-second delay.
e.g., 1 = 15 seconds, 2 = 30 seconds, etc.
++> 7$
1&

&+> 7KAA
$2&
.##A/A*
$1&$+-

&2+> 7$
7+AAN.O?.
'+$3''&
LC$-A
'$
86+)
8656 &
2& 2&-$4
+> 7$
*55
Dynamic Signaling Priority / AAV Enable
0 = Primary Dialer first / using AAV via phone line
1 = IP/GSM module first for alarm reports / not using AAV
1&
'
&'
-D 2
4;;
&$
8#D+> 7
'$
4&
''$
For Dynamic Signaling Priority: 
)
&2-)
+&CA-
'644$
+&C
&$'644$
02'644)
+&C
&$
+&C
&$'644$
For AAV Path Select:
+; &.&
&K;
&'$
*56
Zone Programming Menu Mode
H$
B$
*57
Function Key Menu Mode
&&$
=&$
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com