– 13 –
ARMING PERIMETER ONLY
(With Entry Delay ON)
Using the 3
Use this key when you are staying home, but might expect someone to use the entrance door
Failure to close an
open exit route zone
before the exit delay
time ends may result in
that zone being auto-
matically bypassed at
When armed in STAY mode, the system will sound an alarm if a protected door or window is
opened, but you may otherwise move freely throughout the premises. Late arrivals can enter
through the entrance door without causing an alarm, but they must disarm the system within the
entry delay period or an alarm will occur.
Close all protected perimeter windows and non-main exit doors before arming (see
CHECKING FOR OPEN ZONES section).
1. + 3 ENTER SECURITY CODE THEN PRESS STAY
(Security Code) Example: 7 2 9 6 then press the STAY key.
2. ARMED ✱✱✱STAY✱✱✱ LISTEN FOR 3 BEEPS
The keypad will beep three times and will display the armed
STAY message. The red ARMED indicator also lights.
You can restart the exit delay at any time after arming in the STAY mode by pressing the ✱
key. This is useful if you wish to open the entry/exit door to let someone in after arming the
system. This avoids having to disarm the system and then arm it again.