Loading...
26 –
SECURITY CODES (Continued)
To Add a User or
Change a User's
Code
Changing the
Master Code
Follow the procedure for
changing a user’s code,
but enter user #02. You
will be prompted to enter
the new code a second
time to confirm
accuracy.
Important: Temporary users of the system (e.g., babysitters, cleaning staff, etc.) should not be
shown how to use any system function they do not need to know, such as bypassing protection
zones for example.
Sequential key depressions for all steps in a procedure must be made within 2 seconds of one
another, or else the entire entry is aborted and must be repeated from its beginning (e.g.,
perform steps 1, 2, and 3 below with no delay between steps).
CODE
1. + 8 ENTER MASTER CODE THEN PRESS CODE KEY
(Master Code) Example: 7 2 9 6 then press the CODE key.
2. ENTER USER NUMBER
(User Number) Enter the 2-digit User Number (03-16) for the user you
are adding or changing.
3. ENTER USER'S CODE
(User's Code) Enter the new 4-digit security code for that user.
CODE
To Delete a User 1. + 8 ENTER MASTER CODE THEN PRESS CODE KEY
(Master Code) Example: 7 2 9 6 then press the CODE key.
2. ENTER USER NUMBER
(User Number) Enter the 2-digit User Number (03–16) for the user whose
code you are deleting.
3. STOP. Wait (about 3 seconds) until the keypad beeps once before
pressing any other key. The code is automatically deleted.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com