– 27 –
TESTING THE SYSTEM
(TO BE CONDUCTED WEEKLY)
Using the 5
The TEST key puts your system into the Test mode, which allows each protection point to be
checked for proper operation. The keypad sounds a single beep every 40 seconds as a
reminder that the system is in the Test mode.
An alarm message will not be sent to be sent to your alarm monitoring company during
the following tests.
1. ✱✱✱ DISARMED ✱✱✱
READY T O ARM
DISARM THE SYSTEM
Disarm the system and close all protected windows, doors, etc.
The “Ready” message should be displayed and the green
READY indicator should also be lit .
2. + 5 ENTER THE SECURITY CODE THEN PRESS TEST
(Security Code) Example: 7 2 9 6 then press the TEST key.
3. LISTEN. The external sounder should sound for 1 second and then turn
If the sounder does not sound, CALL FOR SERVICE
4. FAULT ZONES. Open each protected door and window in turn and listen for
three beeps from the keypad. Identification of each faulted
protection point should appear on the display. The display will
clear when the door or window is closed.