Loading...
2 - 17
2 Starting a Sample System
EtherCAT Communication Unit USER’S MANUAL (I574-E1)
2-5 Mounting and Wiring for the EtherCAT
Communication Unit
2
2-5-2 Mounting the EtherCAT Communication Unit on the RX-V1 Inverter
[Advance Preparations]
Before use, cut the FG cable to an appropriate length for the distance to the Inverter's grounding ter-
minal and the size of the terminal block, and crimp the cable to the crimp terminal.
For the position of the grounding terminal and the size of the terminal block, refer to Arrangement of
Main Circuit Terminal Block under 2-2 Wiring in the user's manual for MX2 or RX-V1 Inverters (Cat
No.I585 or I578).
1Remove the following parts from the RX-V1
Inverter.
A. Digital operator
B. Spacer cover
C. Terminal cover
D. Front cover
2Remove the two break-outs from the front cover.
Check that there are no burrs left on the
break-outs.
2-5-2 Mounting the EtherCAT Communication Unit on the RX-V1 Inverter
A
B
C
D
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com