HOW TO USE THE MAINTENANCE MODE
The console features a maintenance mode that allows
incline of the treadmill, view machine information, and
view a button’s keycode.
1. Select the settings main menu.
See step 1 on page 25.
2. Select the maintenance mode.
In the settings
button to enter
nance mode main screen will show information
about the model and version of the treadmill.
Touch the Firmware Update button to check for
update will begin automatically.
To avoid damaging the treadmill, do not turn off
is being updated.
The screen will show the progress of the update.
When the update is complete, the treadmill will turn
off and then turn back on. If it does not, press the
power switch into the off position. Wait for several
seconds, and then press the power switch into the
reset position. Note: It may take a few minutes for
the console to be ready for use.
your console to function slightly differently. These
updates are always designed to improve your exer-
4. Calibrate the incline system of the treadmill.
Touch the Calibrate Incline button. Then, touch the
Begin button to calibrate the incline system. The
treadmill will automatically rise to the maximum
incline level, lower to the minimum incline level,
and then return to the starting position. This will
calibrate the incline system. Press the Cancel but-
ton to return to the maintenance mode. When the
incline system is calibrated, touch the Finish
IMPORTANT: Keep pets, feet, and other objects
away from the treadmill while the incline sys-
tem is calibrating. In an emergency, pull the key
from the console to stop the incline
5. View machine information.
Touch the Machine Info button to view information
about your treadmill. After you view the information,
touch the back button on the screen.
6. Find keycodes.
The Keycodes button is intended to be used by
service technicians to identify whether a certain
button is working correctly.
7. Exit the maintenance mode.
To exit the maintenance mode, press the back but-
ton on the console.