11. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
10. Identify the Left Pedal (61), which is marked with
Using an adjustable wrench, firmly tighten the
Left Pedal (61) counterclockwise into the Left
Crank Arm (63).
Tighten the Right Pedal (not shown) clockwise
into the Right Crank Arm (not shown).
9. Tip: Avoid pinching the wires. Insert the
wires into the Handlebar Post (6) and set the
Handlebar (7) on the Handlebar Post.
Then, firmly tighten the Handlebar Knob (105)
into the T-clamp (28) on the underside of the
Handlebar (7). Note: The Handlebar Knob func-
tions like a ratchet. Turn the Handlebar Knob
clockwise, pull it downward, turn it counterclock-
wise, push it upward, and then turn it clockwise
again. Repeat this process until the Handlebar
Knob is tight. Avoid pinching