Loading...
9
5
76
76
96
94
76
5. Tip: Avoid pinching the wires. Insert the
Upright (2) into the Frame (1).
Attach the Upright (2) with six M10 x 20mm
Screws (76); start all the Screws, and then
tighten them.
Then, connect the Upper Wire (94) to the Main
Wire (96).
Avoid pinching
the wires
Avoid pinching
the wires
6
6. Locate the wire tie (D) in the top of the Upright
(2) and pull the Upper Wire (94) out of the
Upright. Then, untie and discard the wire tie.
Tip: Avoid pinching the wires. Orient the
Wire Cover (20) so that the tab (E) is in
the location shown. Attach the Wire Cover
to the Frame (1) and the Upright (2) with two
M4 x 16mm Screws (115).
115
E
20
94
2
2
1
1
D
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com