4. Fit the holding bracket/ screen assembly onto the top baffle of the combustion chamber.
a. Use 4mm X10 Aluminum pop rivets (5 off).
5.) Locate the screen in the closed position.
a. Pull the screen up to release it from the lookcing mecaninsm.
b. Make sure the magnets face the base plate.
c. Check for strong magnetic attanchmet between base plate and screen magnets by pulling
the handle. (20 N load)
b. Make sure the screen is moving freely upwards and downwards
c. Make sure locking mechanism holds the screen in the open position.
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com