12 WatchGuard AP327X
Hardware Specifications
Ethernet Power Injector (Optional)
You can also power the AP327X with an optional Ethernet Power Injector. The PoE+ power injector enables
you to power the AP through an existing Ethernet connection. With this device, you do not have to position
your AP near a power outlet.
This device complies with IEEE 802.3at/af PoE specifications. Do not use any PoE adapters that are not
IEEE 802.3at/af compliant as they may damage your device.
Connect the Ethernet Power Injector
To connect an Ethernet Power Injector to the WatchGuard AP:
1. Plug the Ethernet Power Injector into an AC power source.
2. Connect an Ethernet cable from your network backbone (for example, PoE+ capable router, switch, or
hub) to the LAN connector on the Ethernet Power Injector.
3. Connect an Ethernet cable from the LAN1 (PoE) interface on the AP to the PoE port on the Ethernet
Power Injector.
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com