TROUBLESHOOTING FOR LANDSCAPE
Problem
When the remote is activated
nothing happens
Possible Cause Suggested Remedy
The remote is not talking to the receiver.
The remote batteries are flat.
Reprogramme the remote to
the receiver (Refer Millennium
manual in installation manual).
Replace the batteries.
Allow the fire to cool down and
then try to relight the fire. If the
fire fails to relight, contact the
manufacturer.
Contact the manufacturer.
All pressures are set in the
factory at the time of
manufacture, however the
installing plumber mus make
sure the pressures are correct.
The fire cuts off and won’t relight The over temp snap disc has
been activated.
The fan will not come on Possible caused by overheat
or electrical fault.
Flame appears to be low
IF YOUR LANDSCAPE FIREPLACE STILL DOES NOT OPERATE CORRECTLY CONSULT YOUR DEALER.
ALL SERVICE AND REPAIRS SHOULD BE PERFORMED BY AN AUTHORISED AGENCY.
ALL SPARE PARTS AND OPTIONAL TRIM FINISHES ARE AVAILABLE FROM GLENDIMPLEX PTY LTD.
Pressure not set.
30
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com