Place lava rock by hand. DO NOT dump bag out into tray to avoid
clogging the burner with dust. Position the lava rock (10kgs) to a level
about 1” above the top of the burner. Make sure that you do not block
the igniter box with lava rock to ensure proper ignition.
Lava Rock and Glass Filler Warning:
2. Do not light or use this ﬁre table if ﬁller is wet. Ensure ﬁller is completely dry before lighting.
Intense heat can cause wet ﬁller to explode and hit someone causing injury.
3. Please keep away from the ﬁre table for at least 20 minutes during initial start-up as ﬁller
could retain some moisture from manufacturing and shipping.
1. Do not overﬁll the burner area with rock or glass ﬁller. The depth of the ﬁller should not be
more than one inch above the burner tube. Only Real Flame ﬁller products have been
certiﬁed and tested by CSA for safe use with this Real Flame ﬁre table. Using other ﬁller
material may result in increased popping/ and cracking or increased CO gas emission.