• Check unit for gas leaks.
• Ensure that both high and low pressures are set as per the appliance data plate. Refer Page
5 for adjustments and Test pressure points
• Turn the unit on to ensure it operates correctly.
• Instruct the customer on the use of the remote control. Refer to remote control operating
guide on pages 17, 18 and 19.
CAPTIVA ZERO CLEARANCE MODEL (continued)
Tests to be carried out by installer
SERVICING AND MAINTENANCE
To follow when servicing,
removing fan or changing
valve or control modules.
IMPORTANT: POWER MUST BE
ISOLATED PRIOR TO CARRYING
OUT THE SERVICE/MAINENANCE.
SERVICE/MAINENANCE ONLY TO
BE CARRIED OUT BY AN
Figure (1) Remove bottom louvre door by
releasing spring loaded catch on left side.
Figure (3) Undo the door locating clips on
each side of the door.
Figure (5) Remove the screw holding back
plate in postion and remove plate.
Figure (2) Remove top louvres by removing
the screws on each side.
Figure (4) Pull door outwards at the bottom
and then lift the door up and remove from