4
INSTALLATION
Install the zero clearance wood inbuilt only as described in these instructions and using only
components from the list below.
Parts Required
BF16 zero clearance wood inbuilt;
Flue:
- Flue lengths,
- Elbows (where necessary),
- Associated components as per these installation instructions.
Required Component (sold separately)
Moulded bricks (SFA0080);
Black straight narrow trim (SFA0085);
or
Black straight masonry trim (SFA0087).
Options (sold separately)
Air diffuser kit (SFA0086).
Safety Information
WARNING
THE APPLIANCE AND FLUE-SYSTEM SHALL BE INSTALLED IN ACCORDANCE
WITH AS/NZS 2918 AND THE APPROPRIATE REQUIREMENTS OF THE RELEVANT
BUILDING CODE OR CODES.
APPLIANCES INSTALLED IN ACCORDANCE WITH THIS STANDARD SHALL
COMPLY WITH THE REQUIREMENTS OF AS/NS 4013 WHERE REQUIRED BY THE
REGULATORY AUTHORITY, I.E. THE APPLIANCE SHALL BE IDENTIFIABLE BY A
COMPLIANCE PLATE WITH THE MARKING 'TESTED TO AS/NZS 4013'.
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN
WRITING BY THE TESTING AUTHORITY IS CONSIDERED AS BREACHING AS/NZS
4013.
CAUTION
MIXING OF APPLIANCE OR FLUE SYSTEM COMPONENTS FROM DIFFERENT
SOURCES OR MODIFYING THE DIMENSIONAL SPECIFICATION OF
COMPONENTS MAY RESULT IN HAZARDOUS CONDITIONS. WHERE SUCH
ACTION IS CONSIDERED, THE MANUFACTURER SHOULD BE CONSULTED IN
THE FIRST INSTANCE.
CRACKED AND BROKEN COMPONENTS e.g. GLASS PANELS OR CERAMIC TILES,
MAY RENDER THE INSTALLATION UNSAFE.
A CARBON MONOXIDE (CO) DETECTOR/ALARM IS REQUIRED IN THE ROOM IN
WHICH THE ZERO CLEARANCE WOOD INBUILT IS INSTALLED. THE CO
DETECTOR WILL PROVIDE WARNING IF, FOR ANY REASON, THE APPLIANCE
FAILS TO FUNCTION CORRECTLY.
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com