Upgrade from Fireware XTM v11.x to v11.8.x
Release Notes 11
to XTM OS v11.8.x for the first time. If you want to update your WatchGuard AP devices manually, you can
open the WatchGuard AP Software Download page and download the latest AP firmware and manually update
your APdevices. We also provide one previous version of APfirmware on this page for recovery purposes only.
The file names for the latest AP firmware are:
lAP100-v1.2.9.1.bin
lAP200-v1.2.9.1.bin
Upgrade from Fireware XTM v11.x to v11.8.x
Before you upgrade from Fireware XTM v11.x to Fireware XTM v11.8.x, download and save the Fireware XTM
OS file that matches the WatchGuard device you want to upgrade. You can use Policy Manager or the Web UI
to complete the upgrade procedure. We strongly recommend that you back up your device configuration and
your WatchGuard Management Server configuration before you upgrade. It is not possible to downgrade
without these backup files.
If you use WatchGuard System Manager (WSM), make sure your WSM version is equal to or higher than the
version of Fireware XTM OS installed on your Firebox or XTM device and the version of WSM installed on your
Management Server. Also, make sure to upgrade WSM before you upgrade the version of XTM OS on your
XTM device.
If you use an XTM 5 Series or 8 Series device, you must upgrade to Fireware XTM v11.7.4
before you can upgrade to Fireware XTM v11.8.x.
We recommend that you reboot your Firebox or XTM device before you upgrade. While this is
not necessary for most higher-model XTM devices, a reboot clears your device memory and
can prevent many problems commonly associated with upgrades in XTM 2 Series, 3 Series,
and some 5 Series devices.
Back up your WatchGuard Management Server Configuration
From the computer where you installed the Management Server:
1. From WatchGuard Server Center, select Backup/Restore Management Server.
The WatchGuard Server Center Backup/Restore Wizard starts.
2. Click Next.
The Select an action screen appears.
3. Select Back up settings.
4. Click Next.
The Specify a backup file screen appears.
5. Click Browse to select a location for the backup file. Make sure you save the configuration file to a
location you can access later to restore the configuration.
6. Click Next.
The WatchGuard Server Center Backup/Restore Wizard is complete screen appears.
7. Click Finish to exit the wizard.
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com