Dual Band Wireless PCI-E Adapter -RWND-N9003PCE- User Manual
Figure 5-3
Figure 5-4
SoftAP mode: Select to enable or disable the function.
Internet Connecting Share (ICS): Specify a connection through which devices connected to
your AP can access the Internet.
SSID: Enter the name for your softAP (for example, Jone) so that others can know which AP is
yours when trying to connect to it.
Security Type: The security type here is set to be WPA2-PSK which is based on 802.11i and
uses AES (Advanced Encryption Standard) instead of TKIP. It was designed to improve the
security features of WEP. WPA2-PSK uses a passphrase or key to authenticate your wireless
connection. You needn’t make any configuration here.
Encryption Type: The encryption type here is set to be AES.
Security Key: Enter the Key in the field to make your AP security enabled. It is recommended
that you specify another key instead of the default key 12345678. Only by entering the
corresponding key can other computers establish a successful connection with your AP.
IP Address: Here displays the IP address of the SoftAP.
Having completed the above settings, click Apply; then Figure 5-4 will pop up, where you click OK
to make SoftAP mode take effect.
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com