Dual Band Wireless PCI-E Adapter -RWND-N9003PCE- User Manual
Chapter 2 Installation
Please install the PCI-E adapter into your computer before installing the driver and utility software
from the Resource CD.
2.1 Hardware Installation
1. Turn off your computer and unplug the power cord from the computer.
2. Open the case and locate an available PCI-E slot. Remove the metal slot cover on the back of
the PC. Keep the screws. Turn to your computer manufacturer for instructions if needed.
3. Insert the PCI-E adapter into the PCI-E slot. Make sure that all of its pins have touched the
slot's contacts. Once the adapter has been firmly inserted, screw its fastening tab. Then, close
your PC case.
4. Insert the power cable back into the computer and turn on your computer.
When the hardware has been successfully installed on your computer, you may be prompted
'Found New Hardware Wizard' (as shown in Figure 2-1 and Figure 2-2); please click Cancel, and
then follow the Software Installation steps to install driver and utility for your adapter.
Figure 2-1 Found New Hardware Wizard in Windows
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com