AC750 Wireless Dual Band Gigabit Router RNX-AC750RT User Manual
Dynamic IP - You can check this radio button to use Dynamic IP as the secondary
connection to connect to the local area network provided by ISP.
Static IP - You can check this radio button to use Static IP as the secondary connection
to connect to the local area network provided by ISP.
Connection Mode-choose the Internet connection mode.
Always on - In this mode, the Internet connection will be active all the time.
Connect on Demand - In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time) and be re-established
when you attempt to access the Internet again. If you want your Internet connection
keeps active all the time, please enter “0” in the Max Idle Time field. Otherwise, enter the
number of minutes you want to have elapsed before your Internet access disconnects.
Connect Manually - You can click the Connect/Disconnect button to connect/disconnect
immediately. This mode also supports the Max Idle Time function as Connect on
Demand mode. The Internet connection can be disconnected automatically after a
specified inactivity period and re-established when you attempt to access the Internet
again.
Click the Connect button to connect immediately. Click the Disconnect button to disconnect
immediately.
Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle
Time because some applications are visiting the Internet continually in the background.
Service Name/Server Name - The service name and server name should not be configured
unless you are sure it is necessary for your ISP. In most cases, leaving these fields blank will
work.
MTU(Bytes) - The default MTU size is 1480 bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required by your ISP.
Enable IGMP Proxy - IGMP (Internet Group Management Protocol) is used to manage
multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for
client devices, such as the modem router. The default value is enabled, and if you are not
sure, please contact your ISP or just leave it.
Use IP address specified by ISP: - If your ISP does not automatically assign IP addresses
to the router during login, please click “Use IP address specified by ISP” check box and
enter the IP address provided by your ISP in dotted-decimal notation.
Echo request interval - The router will detect Access Concentrator online at every interval.
The default value is “0”. You can input the value between “0” and 120. The value “0” means
no detect.
- 28 -
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com