AC750 Wireless Dual Band Gigabit Router RNX-AC750RT User Manual
Limited by local law regulations, version for North America does not have region selection
Mode - Select the desired mode.
11an mixed - Select if you are using both 802.11a and 802.11n wireless clients. If you
set the Mode 11an mixed, all of 802.11a and 802.11n wireless stations can connect to
11a/n/ac mixed - Select if you are using a mix of 802.11a, 802.11n and 802.11ac
wireless clients. It is strongly recommended you set the Mode 11a/n/ac mixed, all of
802.11a, 802.11n and 802.11ac wireless stations can connect to the router.
Channel - This field determines which operating frequency will be used. The default channel
is set to Auto, so the router will choose the best channel automatically. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
Enable SSID Broadcast - When wireless clients survey the local area for wireless networks
to associate with, they will detect the SSID broadcast by the router. If you select the Enable
SSID Broadcast checkbox, the Wireless router will broadcast its name (SSID) on the air.
Enable WDS Bridging - Check this box to enable WDS. With this function, the router can
bridge two or more WLANs. If this checkbox is selected, you will have to set the following
parameters as shown in Figure 4-29. Make sure the following settings are correct.
SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client.
You can also use the search function to select the SSID to join.
- 52 -