AC750 Wireless Dual Band Gigabit Router RNX-AC750RT User Manual
Add device - You can add a new device to the existing network manually by clicking this
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
Step 1: Press the WPS/Reset button on the back panel of the router, as shown in Figure 4-31.
You can also keep the default WPS status as Enabled and click the Add device button in
Figure 4-30. Then choose Press the button of the new device in two minutesand
click Connect, shown in Figure 4-32.
Figure 4-31
Figure 4-32 Add A New Device
Step 2: Press and hold the WPS button of the client device directly.
Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup
Step 4: When the WPS LED is on, the client device has successfully connected to the router.
II. Enter the client devices PIN on the router
- 54 -
Terms of Use | Privacy Policy | DMCA Policy