AC750 Wireless Dual Band Gigabit Router RNX-AC750RT User Manual
storage sharing servers.
Guest Network Isolation -. If enabled, guests are isolated from each other.
Guest Network Bandwidth Control - If enabled, the Guest Network Bandwidth Control rules
will take effect.
Band Select/Guest NetworkSelect the wireless network band (2.4G/5G) and enabled or
disable its Guest Network function.
Network Name - Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
Max Guest numberThe maximum of guests at the same time,
Security - You can configure the security of Guest Network here.
Access Time - During this time the wireless stations could accessing the AP.
Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page Bandwidth Control->Control Settings”.
4.9 DHCP
Figure 4-43 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-43): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding functions.
4.9.1 DHCP Settings
Choose menu DHCP DHCP Settings, you can configure the DHCP Server on the page as
shown in Figure 4-44.The router is set up by default as a DHCP (Dynamic Host Configuration
Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the router on the LAN.
- 65 -
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com