Wireless High Gain USB Adapter RNX-N150HG User Manual
Chapter 4 WPS Configuration
WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an
existing network quickly.
If the wireless card supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless card and router using either Push Button Configuration
(PBC) method or PIN method.
First, the WPS software should be installed. Insert the Resource CD into your CD-ROM
drive. To continue, double-click My Computer, and then double-click the CD/DVD drive
where the installation CD was placed. Open RNX-N150HG folder, and double-click
wps.exe. Then you will see Figure 4-1.
Then, please follow the step-by-step instruction to complete the WPS installation. After
that, WPS function can be enabled. Here we will introduce two ways to configure the
4.1 PBC (Push Button Configuration) method
1. Firstly, press the WPS button of the router. There are two ways:
1) Press the WPS button directly on the front panel of the Router shown in X
2) Open the Router’s Web-based Utility and click WPS link on the left of the main