Professional Blender 1400W RHB-18001
1. Power Switch
“O” = Power Off
“ I ” = Power On
When powered on, the breathing LED light will ﬂash, then product will go into standby mode
and be ready for use.
2. Stepless Speed Regulator Knob
“ ” = Stop
“MIN” = Minimum Speed
“MAX” = Maximum Speed
After powering on the blender, turn the Speed Regulator Knob to the “MIN” position, and the
blender will start to work at minimum speed. You can control the speed by rotating the knob.
When product is working, the LED will remain light.
If you switch off the product using the Power Switch, but the Speed Regulator Knob is not in “ ”
position, the blender will not work when you turn it on again, and the breathing LED light will ﬂash.
To reset, you need to turn the Speed Regulator Knob to “ ” position, then rotate the knob
between “MIN” and “MAX”. The blender will work again. This is designed to prevent the
machine from accidentally starting.
If blending time exceeds 10 minutes, the machine will go into standby mode automatically.
You will need to reset again by turning the Speed Regulator Knob to “ ” position, then
rotate the knob between “MIN” and “MAX”. We suggest the working time not exceed 2
3. Pulse Switch: Hold the switch down to pulse at maximum speed.
4. Program Buttons: 3 pre-programmed operating modes: “Smoothie”, “Ice” and, “Sauce”.If
the blender is working under “Smoothie” mode, pressing the “Smoothie” button again will
pause the blender. If another program is selected, the blender will change to that mode. If
any of these 3 programs are in use, the Speed Regulator Knob and Pulse Switch will not work.
Voltage 120 V
Dimensions L x W x H 8.11 x 8.90 x 20.44 in
Product Weight 9.92 lbs
Cord Length 39.37 in
Cup Material BPA-Free
Material / Finish Stainless Steel and Plastic