Ports on the computer unit DSQC1000
The illustration below shows the two main ports on the computer unit DSQC1000,
the service port and the WAN port.
Service port on the computer unit (connected to the service port on the controller
front through a cable).
WAN port on the computer unit (connects to factory network).B
The WAN port is the only public network interface to the controller, typically
connected to the factory network with a public IP-address provided by the network
LAN1, LAN2, and LAN3 can only be configured as private networks to the IRC5
Continues on next page
20 Operating manual - Getting started, IRC5 and RobotStudio
3HAC027097-001 Revision: P
© Copyright 2004-2018 ABB. All rights reserved.
1.4 Connecting a PC to the controller