4 MEASUREMENT CONDITIONS SETTING
52
4.3.5 Trace Scale Setting
The trace scale means the vertical scale division value, which can be set by two
methods.
The first method: make a mouse click on the
trace scale field in the trace status line and enter
the required numerical value.
The second method: move the mouse pointer over the vertical scale until the
pointer form becomes as shown in the figure. Locate the pointer in the top or
bottom parts of the scale, at approximately 10% of the scale height from the
top or bottom of the scale. Press left button of the mouse and holding it drag
the pointer from the scale center to enlarge the scale, or to the center of the
scale to reduce the scale.
4.3.6 Reference Level Setting
The value of the reference level, which is indicated on the vertical scale by «» and
«◄» symbols, can be set by two methods.
The first method: make a mouse click on the
reference level field in the trace status line and
enter the required numerical value.
The second method: move the mouse pointer over the vertical scale until the
pointer form becomes as shown in the figure. Locate the pointer in the center
part of the scale. Press left button of the mouse and holding it drag the
pointer up the scale to increase the reference level value, or down the scale to
reduce the value.
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com