EDITION - V 1.0
23
User
Manual
15 PARTICULAR DAMAGES
15.1 Damages requiring service by a qualified
service agent
If any of the following conditions are observed, the wheelchair
must be serviced by a qualified service agent:
• Any wheel adjustment;
• Any defective ball bearings of the forks;
• Any defective ball bearings of the front wheels;
15.2 Special damages that require the return of
the wheelchair to the manufacturer
If any of the following conditions are observed, always contact
your service agent prior to sending your wheelchair for repairs
at Motion Composites.
• Part of the frame or cross brace is cracked;
• The thread of a riv nut is damaged;
• Part of the frame or cross brace is broken;
• Cross brace becomes worn;
• Problems continue to be identified after several adjustments
or repairs have been made by a qualified service agent.
I. Appendix
I.I TABLE “FRONT SEAT-TO-FLOOR HEIGHTS”
I.II TABLE “REAR SEAT-TO-FLOOR HEIGHTS”
Wheel size Height available ± ¼”
20” wheel 12 ½” to 17”
22” wheel 13 ½” to 18”
24” wheel 14 ½” to 19”
25” wheel 15” to 19 ½”
26” wheel 15 ½” to 20”
3” caster 4” caster 5” caster 6” caster 7” caster 8” caster
Stem bolt length Stem bolt length Stem bolt length Stem bolt length Stem bolt length Stem bolt length
Forks STD +1” +2” STD +1” +2” STD +1” +2” STD +1” +2” STD +1” +2” STD +1” +2”
4” P1 13 14 15 13 1/2 14 1/2 15 1/2
P2 13 1/2 14 1/2 15 1/2 14 15 16 14 1/2 15 1/2 16 1/2
5” P1
P2 13 3/4 14 3/4 15 3/4 14 3/4 15 3/4 16 3/4 14 3/4 15 3/4 16 3/4
P3 14 1/4 15 1/4 16 1/4 14 3/4 15 3/4 16 3/4 15 1/4 16 1/4 171/4” 15 3/4 16 3/4 17 3/4
P4 14 3/4 15 3/4 16 3/4 15 1/4 16 1/4 17 1/4 15 3/4 16 3/4 17 3/4 16 1/4 17 1/4 18 1/4 16 3/4 17 3/4 18 3/4
7” P1 16 1/4 17 1/4 18 1/4 16 3/4 17 3/4 18 3/4
P2 16 1/4 17 1/4 18 1/4 16 3/4 17 3/4 18 3/4 17 1/4 18 1/4 19 1/4
P3 16 3/4 17 3/4 18 3/4 17 1/4 18 1/4 19 1/4 17 3/4 18 3/4 19 3/4 18 1/4 19 1/4 20 1/4
P4 16 3/4 17 3/4 18 3/4 17 1/4 18 1/4 19 1/4 17 3/4 18 3/4 19 3/4 18 1/4 19 1/4 20 1/4 18 3/4 19 3/4 20 3/4
P5 16 3/4 17 3/4 18 3/4 17 1/4 18 1/4 19 1/4 173/4” 18 3/4 19 3/4 18 1/4 19 1/4 20 1/4 18 3/4 19 3/4 20 3/4 19 1/4 20 1/4 21 1/4
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com