T (450) 588-6555 - 1 866 650-6555 F (450) 588-0200
info@motioncomposites.com
6
helio C2
4. Before use
4.1 General Warning
Your HELIO C2 wheelchair has been designed by professionals
with proper use of aluminium in mind. DO NOT TRY TO
MODIFY THE FRAME BY ANY MEANS. THE FRAME MAY
BE SEVERELY DAMAGED IN THE EVENT OF DRILLING AND
GRINDING, THUS VOIDING THE WARRANTY. Only use Motion
Composites approved and designed clamps and accessories on
your HELIO C2 wheelchair.
4.1.1 Note to users:
Carefully read the instructions in this manual before using
or servicing your wheelchair. If you have any questions or
difficulties understanding the following instructions, please
contact a qualified technician; you may also wish to contact a
Motion Composites technician by phone or email (see contact
information on previous page).
4.1.2 Note to dealers & qualified technicians
Read this manual before servicing, repairing, operating
or adjusting the wheelchair. If you have any questions or
difficulties understanding the following instructions, please
contact a qualified technician; you may also wish to contact a
Motion Composites technician by phone or email (see contact
information on previous page).
4.2 Symbols
The following symbols are used throughout this manual. Please
familiarize yourself with their meaning.
The warning sign indicates important information to
prevent injuries and property damage.
Useful information for the user
4.3 Label Locations
Do not remove or alter any labels on the wheelchair. If the label
is damaged, replace it with a new one.
Initial setup of your HELIO C2 wheelchair must be
done by a qualified technician.
The latest version of this manual can be found on our
website at motioncomposites.com
Regular maintenance of your HELIO C2 will extend the
life of the wheelchair. Take your wheelchair to a
qualified technician every year for inspection and
servicing.
Avoid tightening the screws with an air tool or electric
tool. Final tightening should be done manually.
5. Technical Specifications
5.1 Structure
Frame Folding with carbon fiber C3
cross brace
Material Aerospace grade carbon fiber
composites
Weight 12 lbs (w/o rear wheels &
footrest)
Weight capacity 250 lbs (or 350 lbs with HD kit)
5.2 Dimensions
Width 14’’ to 20’’
Depth 14’’ to 20’’
Front seat-to-floor height 13’’ to 21 ¼’’
Rear seat-to-floor height 12 ’’ to 20’’
5.3 Adjustability
Upholstery Tension adjustable bolt on
Back height 9’’ to 21’’
Adjustable angle from 70° to 110°
Footrest removable and swing away
Camber 0°, 3°, 6°
Centre of gravity from ½” to 4 ½” + amputee axle
plate option
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com