- 4 -
Video 15 SB Manual
3.4 Mounting of the camera and/or plate
The Video 15 SB is delivered with the Touch & Go camera
quick locking system.
-> Apply the horizontal and vertical brake.
-> Hold the camera and /or plate with one hand.
-> Grasp the locking lever with your thumb and index
finger and pull down the red safety button.
-> Move the locking lever as far as possible to the left
and take out the camera and /or plate.
-> Attach the camera plate to the camera (see also chap-
ter 5.1) around the camera´s centre of gravity.
-> By mounting the camera and/or plate again it will lock
automatically and the locking lever will snap back
audibly into its initial position.
3.5 Counterbalancing of the camera
-> Before adjusting the counterbalance of the camera, the
center of gravity of the camera must be centered preci-
sely over the axis of the fluid head.
-> Lock the vertical brake, adjust the vertical setting of the
fluid damping to “0” and adjust the knob for the coun-
terbalance setting also to “1”.
-> Secure the camera with one hand and open the
vertical brake.
-> Should the camera be front or back heavy open the
lock of the cameraplate/balanceplate (undo red wing
screw slightly on the side of the fluid head; keep the
camera secured with one hand).
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com