T (450) 588-6555 - 1 866 650-6555 F (450) 588-0200
info@motioncomposites.com
14
10.6.4 Replacing Armrest Pad
• Remove screws (1) (Fig. 20) located under pad (through the
tube).
• Replace with new armrest pad.
• Reinstall screws (1) and tighten firmly.
Fig. 20
10.6.5 Installing the Swing-away Armrest
receiver
• Remove the two bolts (1) (Fig. 21).
• Align the armrest receiver with the mounting holes of the
frame and of the transit securement anchor.
• Reinstall the bolts and tighten firmly.
Fig. 21
10.6.6 Adjusting Swing-away Armrest height
• Pull the armrest out of the receiver (1) (Fig. 22).
• Remove screws (2) (Fig. 23).
• Inside the armrest tube, slide the dowel nut with a long flat
screwdriver at the desired height (3)
• Reinstall screws (2).
• Reinsert armrest in receiver.
Fig. 22 Fig. 23
10.7 Front riggings
10.7.1 Adjusting Footrest length
• Loosen screw (1) (Fig. 24).
• Slide the extension tube inside the front rigging at the desired
length.
• Tighten screw (1) firmly.
1
Fig. 24
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com