T (450) 588-6555 - 1 866 650-6555 F (450) 588-0200
info@motioncomposites.com
6
4. Before use
4.1 General Warning
Your HELIO A7 wheelchair has been designed by professionals
with proper use of aluminium in mind. DO NOT TRY TO
MODIFY THE FRAME BY ANY MEANS. THE FRAME MAY
BE SEVERELY DAMAGED IN THE EVENT OF DRILLING AND
GRINDING, THUS VOIDING THE WARRANTY. Only use Motion
Composites approved and designed clamps and accessories on
your HELIO A7 wheelchair.
4.1.1 Note to users:
The HELIO A7 wheelchair is a manually operated device
intended to be used as a means of mobility for persons
restricted to a sitting position. It is not indicated for the
pediatric population.
Carefully read the instructions in this manual before using
or servicing your wheelchair. If you have any questions or
difficulties understanding the following instructions, please
contact a qualified technician; you may also wish to contact a
Motion Composites technician by phone or email (see contact
information on previous page).
4.1.2 Important warning for using the MOVE as
transportation in a motor vehicle while seated
Please note the helio has not been tailored to be used as a
transportation device in a motor vehicle while seated. Always
transfer from the wheelchair when boarding a motor vehicle.
4.1.3 Note to dealers & qualified technicians
Read this manual before servicing, repairing, operating
or adjusting the wheelchair. If you have any questions or
difficulties understanding the following instructions, please
contact a qualified technician; you may also wish to contact a
Motion Composites technician by phone or email (see contact
information on previous page).
4.2 Symbols
The following symbols are used throughout this manual. Please
familiarize yourself with their meaning.
The warning sign indicates important information to
prevent injuries and property damage.
Useful information for the user
4.3 Label Locations
Do not
remove or
alter any
labels on the
wheelchair.
If the label
is damaged,
replace it
with a new
one.
Initial setup of your HELIO A7 wheelchair must be
done by a qualified technician.
The latest version of this manual can be found on our
website at motioncomposites.com
Regular maintenance of your HELIO A7 will extend the
life of the wheelchair. Take your wheelchair to a
qualified technician every year for inspection and
servicing.
Do not use air or electric tool, tightening should be
done manually.
5. Technical Specifications
5.1 Structure
Frame Folding with aluminum C3 cross
brace
Material 7000 series aluminum alloy
Weight 16 lbs (7.25 kg)
(w/o rear wheels & footrest)
Weight capacity 250 lb (113.3 kg)
Kit HD : 350 lb (158.7 kg)
5.2 Dimensions
Width 14’’ (35.5 cm) to 22’’ (55.9 cm)
Depth 14’’ (35.5 cm) to 20’’ (50.8 cm)
Front seat-to-floor height 13’’ (33.0 cm) to 21¼’’ (53.9 cm)
Rear seat-to-floor height 12’’ (30.5 cm) to 20’’ (50.8 cm)
5.3 Adjustability
Upholstery Tension adjustable or bolt on
Back height 9” (22.8 cm) to 21” (53.3 cm)
Adjustable angle from 70° to 110°
Footrest Swing in / Swing out
Camber 0°
Centre of gravity from ½” (1.2 cm) to 4½” (10.1 cm)
+ amputee axle plate option
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com