Diagram 1
- 3 -
Reporter 400DManual
3.2 Starting the luminaire
Connect the cable to your mains-powered Sachtler ballast.
Open the barndoor of the luminaire. After switching the bal-
last on, the green LED (Stand-by) on the ballast must be
illuminated. Now you can start the luminaire by either using
the ballast or pushing the green push button on the lumi-
naire itself. Maximum light output will be reached approx.
30 seconds after starting.
3.3 Dimming
The luminaire can be dimmed on the ballast, by turning the
knob.
3.4 Switching-off the luminaire
Pressing one of the two green push buttons a second time
will switch off the luminaire. Make sure the luminaire cools
down before packing it away.
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com