TEMPERATURE CONTROL DELUXE
30
BATHROOM CONTROLLERS DELUXE
The Bathroom Deluxe controller(s) allows the user to select the temperature setting for the hot water to be
used in the bathroom. They have a minimum temperature setting of 37°C and a maximum temperature
setting of:
874 series 50°C
876 series 50°C
The Bathroom Deluxe controllers operate in tandem. Whenever an operation is selected on one Bathroom
Deluxe controller, it is also set on the other Bathroom Deluxe controller. The Bathroom Deluxe controllers
automatically have priority (PRIORITY light glows) if they are on.
Important: It is important to turn on the Bathroom Deluxe controller before opening a hot tap in the bathroom
(priority is gained automatically and the PRIORITY light glows). If the Bathroom Deluxe controller is not on
and the Kitchen Deluxe controller is on (will have priority and the PRIORITY light glows), then it is possible to
receive water at a temperature higher than expected from a hot tap in the bathroom. This temperature could
be up to:
874 series 50°C if a temperature limiting device is installed in the hot pipe to the
bathroom or up to 60°C if a temperature limiting device is not installed.
876 series 50°C
Notes on the Bathroom Deluxe controllers:
The Deluxe controller cannot be turned on whilst a hot tap is open.
When a Bathroom Deluxe controller is turned on, it gains priority (PRIORITY light glows) from the
Kitchen Deluxe controller.
The Bathroom Deluxe controller must be on in order to adjust the temperature setting on the Bathroom
Deluxe controller.
The Kitchen Deluxe controller can be turned off from a Bathroom Deluxe controller.
Press and hold the on / off ( ) button on the Bathroom Deluxe controller for three seconds. This turns off all
the Deluxe controllers, including the Bath Fill function if it is on, the displays go blank and the lights go out. If
hot water is flowing from a hot tap, it will go cold.
Warning: It is advised to leave the Bathroom Deluxe controller on after hot water usage is finished in
the bathroom. Turning off a Bathroom Deluxe controller in one bathroom will also turn off the
Bathroom Deluxe controller in the other bathroom. The Kitchen Deluxe controller will gain priority
(PRIORITY light glows) if it is on and the temperature setting can be up to:
874 series 60°C
876 series 50°C
If a hot tap is open in another bathroom, the water will be delivered at: for an 874 series model up to 50°C
if a temperature limiting device is installed in the hot pipe to the bathroom or up to 60°C if a temperature
limiting device is not installed; or for an 876 series model up to 50°C.
Rheem
°C
BATH (l)
Hot Water
1.
PRIORITY
Light on
2.
Adjust
Temperature
3.
Open
hot tap
4.
Bath Fill
1.
2.
Bath
Water
Volume
Bath
Fill
Temp
Set Bath Fill
Water Volume
and Temperature
Open
hot tap
4.
6.
Close
hot tap
3.
Press Bath
Fill Button
(Red light on)
7.
Press Bath
Fill Button
(Red light off)
Bath Fill
completed
(automatic)
Bath Fill Button
(Red light flashes)
5.
B1
BATH FILL
TEMPERATURE
BATH FILL
VOLUME
Bathroom Deluxe
Controller
front cover
closed
front cover
open
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com