TEMPERATURE CONTROL DELUXE
32
BATH FILL FUNCTION
The Bath Fill function is designed to allow the water heater to deliver a selected volume of water at a
selected temperature. The Bath Fill function commences when the bath fill ( ) button is on and a hot tap is
opened. When the set volume has been delivered, the water flow from the water heater ceases and heating
stops. It is also useful for controlling the water volume used by a shower or other application.
Note: The bath level should be monitored periodically while this function is in use to avoid the possibility of
the bath overflowing. The Bath Fill function should be used with caution until you are familiar with its
operation.
Warning: Baths should not be left unattended whenever young children are present. After using the
Bath Fill function, check the water temperature before entering a bath, to ensure it is suitable and will not
cause scald injury.
The Bath Fill function can be set and turned off at any of the Deluxe controllers. Refer to the notes on
page 38.
Bath Fill Function Brief Guide
This guide provides a brief instruction on the operating sequence of the Bath Fill function. It is recommended
to read the explanatory notes and become familiar with each step in the Bath Fill function. Refer to “Bath Fill
Function Explanatory Notes” on page 34.
To operate the Bath Fill function:
1. Turn off all Deluxe controllers
It is advised to turn off all Deluxe controller(s) before
activating the Bath Fill function.
Refer to the notes on the Bathroom Deluxe controllers on
page 30.
2. Pull down the front panel on the Deluxe controller.
The BATH FILL VOLUME and BATH FILL TEMPERATURE
up () and down () buttons will be exposed.
3. Set the Bath Fill temperature
Press the BATH FILL TEMPERATURE up () button or
the BATH FILL TEMPERATURE down () button to select
the desired bath fill temperature.
Refer to “Temperature Adjustment – Deluxe Controllers” on
page 27.
The selected temperature setting will be displayed on all
Deluxe controllers.
4. Set the bath fill water volume
Press the BATH FILL VOLUME up () button or the
BATH FILL VOLUME down () button to select the desired
bath fill water volume. Each press will change the water
volume setting by 10 litres.
Pressing the BATH FILL VOLUME up () button or
BATH FILL VOLUME down () button continuously will
scroll the water volume setting.
A maximum volume of 990 litres and a minimum volume of
10 litres can be set. The volume changes in 10 litre
increments.
The selected bath fill water volume will be displayed and
the bath fill indicator light will glow on all Deluxe controllers.
BATH (l)
°C
K
BATH FILL
VOLUME
1.
2. 3. 4.
1. 2.
ath
4. 6.
3. 7.
5.
“hot water temperature
has been increased”,
or
“hot water temperature
has been decreased”
°C
4 0
BATH (l)
BATH (l)
°C
120
“caution, bath fill water volume has
been increased, bath may overflow”
or
“bath fill water volume has been
decreased”
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com