TEMPERATURE CONTROL DELUXE
35
4. Set the bath fill water volume
Press the BATH FILL VOLUME up () button or the
BATH FILL VOLUME down () button.
The first press of either the BATH FILL VOLUME
up () button or the BATH FILL VOLUME
down () button will display the last selected
bath fill water volume setting in the bath fill water
volume display panel and the bath fill indicator light
will glow.
While the bath fill water volume is displayed, each
subsequent press of the BATH FILL VOLUME
up () button or BATH FILL VOLUME
down () button will change the water volume
setting by 10 litres.
When the BATH FILL VOLUME up () button is
pressed and the water volume setting is increased,
the voice prompt will sound;
“caution, bath fill water volume has been increased, bath may overflow”
When the BATH FILL VOLUME down () button is pressed and the water volume setting is
decreased, the voice prompt will sound;
“bath fill water volume has been decreased”
Pressing the BATH FILL VOLUME up () button or BATH FILL VOLUME down () button
continuously will scroll the water volume setting.
A maximum volume of 990 litres and a minimum volume of 10 litres can be set. The maximum
volume of 990 litres is achieved in 10 litre increments up to 500 litres, then 990 litres is the next
setting.
The selected bath fill water volume will be displayed and the bath fill indicator light will glow on all
Deluxe controllers.
The bath fill water volume display panel will go blank
and the bath fill indicator light will go out 3 seconds
after the last press of either of the volume
adjustment buttons.
The set volume will be remembered when the
bath fill ( ) button is next pressed “on”.
5. Close the front panel on the Deluxe controller.
6. Turn on the Bath Fill function
Press the bath fill ( ) button.
On all Deluxe controllers:
The bath fill operating light will glow.
The bath fill temperature setting will appear on
the temperature display panel.
The bath fill water volume will appear on the
bath fill water volume display panel.
The bath fill indicator light will glow.
The voice prompt will sound;
“please set bath water volume and bath
temperature, then open the hot water tap”
BATH (l)
°C
120
Hot Water
2.
1.
Press
Adjust
Temperature
3.
Open
hot tap
4.
Open
hot tap
4.
7.
Press Bath
Fill Button
(Red light off)
Bath Fill
1.
2.
Bath
Water
Volume
Bath
Fill
Temp
Set Bath Fill
Water Volume
and Temperature
3.
Press Bath
Fill Button
(Red light on)
6.
Close
hot tap
Bath Fill
completed
(automatic)
Fill Button
(Red light flashes)
5.
BATH FILL
VOLUME
BATH FILL
TEMPERATURE
B1
“caution,
bath fill water
volume has been
increased,
bath may overflow”
or
“bath fill water
volume has been
decreased”
Rheem
°C
BATH (l)
BATH (l)
°C
120
40
“please set
bath water volume
and
bath temperature,
then open the
hot water tap”
Terms of Use | Privacy Policy | DMCA Policy
2006-2021 Rsmanuals.com