ShoreTel 12.1 27
Site Requirements and Preparation
This chapter provides information about preparing your site for the SA-100 including
concerns such as physical space, environment, and cabling. This chapter includes the
following topics:
"Recommendations" section on page 27
"Physical Specifications" section on page 27
"Physical Specifications" section on page 27
"Power Cable" section on page 30
"Ethernet Ports" section on page 30
"Maintenance Cable" section on page 31
"Environmental Requirements" section on page 31
4.1 Recommendations
The following recommendations will assist you in planning and preparing your site for the
ShoreTel system.
Hire a cabling contractor to install your racks, patch panels, and cabling.
Have two RJ-48C cables ready for each SA-100.
Reputable surge protector or UPS
For remote deployment, your network should have 384 kbs bandwidth or better
available between the FTP server and the remote SA-100 for downloading upgrade
4.2 Physical Specifications
This section provides physical and consumption information about the SA-100. Units have
a 1U footprint and fit into a standard 19-inch mounting rack. Full-length mounting rails
are shipped in the package. Table 4-1 provide specification information about the SA-100.
Table 4-1 ShoreTel Service Appliance 100 Physical Specifications
Parameter Service Appliance 100 (SA-100)
Dimensions (H x W x D) 1.67 in (4.3 cm) (H) x 17.09 in (43.4cm) (W) x 15.5 in
(39.4 cm) (D).
Weight 17.8 lb (8.06 kg)
Input Voltage 100-240 VAC, 50-60 Hz, 4-2 A
Terms of Use | Privacy Policy | DMCA Policy