SA-100 Planning, Installation and Administration Guide Chapter 5: Installing the Service Appliance 100
Figure 5-2 ShoreTel Command Line Interface
NOTE You can change the default CLI user name and password for the SA-
100 in ShoreWare Director. Refer to the ShoreTel 12.1: System
Administration Guide for more information.
Step 6 Ty p e 3 and press Enter to change the system configuration. The Change
System Congifuration menu appears as shown in Figure 5-3.
Figure 5-3 Change System Configuration Menu
Step 7 Ty p e 6 and press Enter to disable DHCP. The DHCP prompt appears.
Step 8 Ty p e n and press Enter to disable DHCP.
Step 9 Ty p e 1 and press Enter. The Change IP address prompt appears.
Step 10 Type the IP address that you want to assign to the SA-100 and press Enter.
Terms of Use | Privacy Policy | DMCA Policy