SA-100 Planning, Installation and Administration Guide Chapter 6: Configuring the SA-100 for Operation
42
Figure 6-1 Systems Parameters Page
Step 3 In the Extension field, enter the available extension number that you want to
use for ShoreTel Conference to change the internal extension assigned to
ShoreTel Conference.
Step 4 In the External Number field, enter the valid phone number that you want to
use for ShoreTel Conference.
NOTE Make sure that the number that you use is properly mapped to a
telephony trunk. Refer to the ShoreTel 12.1: System Administration
Guide for information about setting up trunks.
Step 5 In the Additional Calling Information field, enter any additional information
that you want to use with the extension. The text will be included in all
conference invites including Outlook invite as well as in the dial in window in
the ShoreTel Viewer.
6.3 Turing Off Port 5004 for RTP
The SA-100 does not support using port 5004 for RTP audio transmissions. Make sure that
the option to use port 5004 for RTP is turned off. To turn off the option to use port 5004 for
RTP, do the following:
Step 1 Launch ShoreWare Director.
Step 2 Click Administration > Call Control > Options. The Call Control Options
page appears.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com