SA-100 Planning, Installation and Administration Guide Chapter 6: Configuring the SA-100 for Operation
46
* indicates required fields.
7. Click Save.
6.4.2 Registering a Backup SA-100 Site with the ShoreTel
Headquarters Server
The SA-100 provides services for users associated with the ShoreTel site where it is installed
and to users of any site in the ShoreTel hierarchy that shares a branch with the installation
site. Unless an SA-100 is installed on or registered with the ShoreTel HQ site, all system
users may not have access to SA-100 services. To ensure that all system users have access to
SA-100 services when there is no unit installed on the HQ site, you can register a backup
site containing an SA-100 with the HQ server. Registering the backup site with the HQ
server establishes a hierarchical branch that allows all users throughout the system access
to SA-100 services. To register a backup SA-100 site on the HQ server, do the following:
Step 1 Launch ShoreWare Director.
Step 2 Click Administration > Sites. The Sites page appears.
Step 3 In the Site column, select HQ server site. The configuration page for the HQ
site appears.
Step 4 In the Service Appliance Conference Backup Site field, select the that you
want to use as a backup site.
NOTE The backup site may be a logical site.
Step 5 Click Save.
Conference Section
HTTPS
*Extension Enter the ShoreTel extension that you want to assign to the
SA-100. Users will use this extension to dial into
conference calls hosted on the unit.
*Assign User Group Select the user group that you to associate with the SA-
100. Audio Conference is the default value.
Backup Section
Enable Daily Backup Check to have the SA-100 perform a backup daily.
IP Address Enter the IP address of the device that you want the SA-
100 to back files up to.
FTP Port Enter the port number that you want the SA-100 to use for
backup. This field is required.
Directory Enter the URL for the directory to which you want the SA-
100 to back files up.
User ID Enter the user name that you want the SA-100 to use to
access the backup directory.
Password Enter the password the SA-100 is to use to access the
backup directory in both fields.
Table 6-1 Registration Fields for the SA-100 (Continued)
Field Description
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com