18 Planning and Installation Guide ShoreTel IP Phone 930D
Planning Understanding Networking and Power Requirements
2
5. Conduct a site survey to measure the coverage range and identify equipment needs (described
below).
6. Prepare a draft installation layout (described below).
7. Order components (described below).
Understanding Networking and Power Requirements
This topic contains information about network and power requirements and recommendations.
Networking Requirements and Recommendations
The following are networking requirements and recommendations:
Assign an IP address (DHCP or static) for each base (required).
Assign an IP address (static) for each handset (required).
Use a switched 10 or 100 Mbps capable network connection to connect to the base
(recommended).
Connect multi-base systems to a common subnet and identify a free multicast address for base-to-
base communications (required).
Power Requirements
The following are system power requirements:
Handset charging stands require a non-switched AC outlet (100-240V 50/60 hz) within two meters
of the charger.
Bases are Class 2 devices and require PoE.
Repeaters require one of these for power:
A non-switched AC outlet (100-240V 50/60hz) within two meters of the repeater.
A SKU 10478 PoE wire adapter along with a PoE splitter, such as the Phihong POE14-050, for
use with a powered Ethernet connection. (See Using a SKU 10478 PoE Wire Adapter and a
PoE Splitter to Power the Repeater on page 19.)
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com