62 Planning and Installation Guide ShoreTel IP Phone 930D
Reference Material Understanding Configuration Parameters
5
BackLight 1-255 Number of seconds the backlight remains on at full
brightness when the handset is idle.
CFG 20
BackLightDim 0-255 Number of additional seconds the backlight remains on
at a DIM level after the BackLight interval has passed
since an idle state was entered.
CFG 20
BackLightSave 0 or 1 If set to 1 then line status updates on the handset will
NOT turn on the handset backlight.
CFG 0
BootName Up to 32 alphanumeric
characters
This is the name of the boot image that is in the base.
The boot file name can be at most 24 characters long.
The combination of filename and path can be up to 32
characters long. A new boot name is specified in a
configuration file and is checked against the NV value to
decide if a new version needs to be downloaded. The
NV value is updated after a successful download and
flash programming sequence.
CFG Value from factory
in NV Storage
Country Up to 3 ASCII
Characters
This parameter specifies the Country that is used by the
Include parameter to identify a particular file to include.
May be between 1 and 255.
SSON,
CFG, MAN
1
DaysOfWeek Up to 64 ASCII
Characters
Comma separated list of the day of week abbreviations
used by the S1 phone to display the time. First day is
Sunday.
CFG Sun,Mon,Tue,
Wed,Thu,Fri,Sat
DectAutoSync Yes or No Enable or disable auto synchronization of the base
radios in a multicell system. Manual configuration is
required if set to No.
CFG “Yes”
DectBaseAppName Up to 32 alphanumeric
characters
This is the name of the DECT processor application
image that is in the base. The application file name can
be at most 24 characters long. The combination of
filename and path can be up to 32 characters long. A
new application name is specified in a configuration file
and is checked against the NV value to decide if a new
version needs to be downloaded. The NV value is
updated after a successful download and flash
programming sequence.
CFG Value from factory
in NV Storage
DectBaseMac Comma separated list
of up to 32 MAC
addresses in hex
Comma separated list of up to 32 Base MAC addresses
that are in the system. The index of this list (0 to 31)
multiplied by 8 is the RPN for that base.
Example:
DectBaseMac 00087B00AA1F, 00087B00AA12
00087B00AA1F is assigned RPN 0
00087B00AA12 is assigned RPN 8
CFG “”
DectBaseName Up to 32 alphanumeric
characters
User friendly name for identifying the base. CFG "Primary Base"
DectBaseNetworking Multicast Specify the type of networking the bases will use to
communicate with each other. All bases on a system
must be set identically. Multicast requires bases to be on
the same subnet or intermediate routers to have IGMP
V2 implemented.
CFG “multicast”
DectBasePrimary IP Address in dotted
decimal format
IP address of the Network Primary Base. This is the
base to which all bases will communicate to synchronize
behavior. All bases in a system must use the same
DectBasePrimary.
CFG “0.0.0.0”
Parameter Value Type Value Sources Default
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com