Reference Material Understanding Configuration Parameters
5
ShoreTel IP Phone 930D Planning and Installation Guide 65
DectMultiCell Yes or No This parameter specifies whether or not the base is part
of a system of more than one base or repeater.
CFG “No”
DectMultiMaster Yes or No Some manually configured base synchronization
arrangements require more than one synchronization
master (when a base is not within radio range, for
example). In this case the value should be set to Yes.
CFG “No”
DectOk Up to 64 ASCII
Characters
String that is displayed on a softkey to OK the current
operation. Must be 6 characters or less. This must
exactly match the systems softkey string assignment for
the active language. Characters in this string must be
specified using UTF-8.
CFG “Ok”
DectNbOnly 0 or 1 Limit all calls to narrowband if 1 by removing G.722 from
SDP offers/answers.
CFG 1
DectRepeaterApp
Name
Up to 32 alphanumeric
characters
This is the name of the repeater application image. The
application file name can be at most 24 characters long.
The combination of filename and path can be up to 32
characters long. A new application name is specified in a
configuration file and is checked against the NV value to
decide if a new version needs to be downloaded. The
NV value is updated after a successful download and
flash programming sequence.
CFG “”
DectRepeaterAuto
CfgMode
Comma separated list
of up to 100 Mode
values 0, 1, or 2
Comma separated list of mode values that assigns the
synchronization mode to each repeater in the
DectRepeaterIpei list. 0=manual assignment using
DectRepeaterSyncSrc, 1=local automatic, 2=chain
automatic
CFG 1
DectRepeaterData
Configured
Comma separated list
of up to 100 configured
values 0 or 1
Comma separated list of configured state values that
assigns the configured state to each repeater in the
DectRepeaterIpei list. 0=not configured, 1=configured
CFG 0
DectRepeaterIpei Comma separated list
of 4 repeater values in
hex
Comma separated list of 4 repeater IPEIs that are
associated with this base. Index of this list links a
specific repeater to other repeater parameter such as
DectRepeaterRpn. Unused repeaters use IPEI=0.
Example:
DectRepeaterIpei 005ad85dd0, 005ad85dd1,0,0,0,0,0
CFG “”
DectRepeaters Comma separated list
of up to 4 IPUI values
in hex
Comma separated list of up to 4 repeater IPEIs that
associated with this base. This is used as a white list to
limit repeater registrations and IPUI values must be
unique to each base (no reuse).
Example:
DectRepeaters 005ad85dd0, 005ad85dd1
CFG “”
DectRepeaterRpn Comma separated list
of up to 100 decimal or
hex RPN values
between 0 and 255
Comma separated list of RPN values that assigns an
RPN value to each repeater in the DectRepeaterIpei list.
Example:
DectRepeaterRpn 0x0, 0x1
CFG 0
DectRepeaterSync
SrcRpn
Comma separated list
of up to 100 decimal or
hex RPN values
between 0 and 255
Comma separated list of RPN values that assigns the
synchronization source to each repeater in the
DectRepeaterIpei list.
Example:
DectRepeaterSyncSrcRpn 0x0, 0x1
CFG 0
Parameter Value Type Value Sources Default
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com